Landis 24″ x 120″ Plain OD Cylindrical Grinder

  |   By  |  0 Comments

Landis 24″ x 120″ Plain OD Grinder

SPECIFICATIONS:
24″ Swing
120″ Distance Between Centers
30″ Diameter Grinding Wheel
Variable Speed Workhead
Hydraulic Table Travel
Manual Tailstock
20HP Spindle Drive
(2) Steady Rests
Free Standing Electrical

Norton Plain 24″ x 144″ LCTU Plain OD Grinder

  |   By  |  0 Comments

e
Norton Plain 24″ x 144″ LCTU Plain OD Grinder
Serial Number: C/5-30078-A/28331
Model: C5 LCTU

SPECIFICATIONS
Swing: 24″
Distance Between Centers: 144″
Grinding Wheel: 36″ Dia. x 5″ Wide
Grinding Wheel Speed: 8500 SFPM
Behind the Wheel Full CNC Dresser with Control
Sony DRO
Coolant Filtration System

Norton CTU Plain OD Grinder

  |   By  |  0 Comments

IMG

Norton 10″ x 72″ CTU Plain Cylindrical Grinder

Serial Number: 27725

SPECIFICATIONS:
10″ Swing Over Table
72″ Distance Between Centers
24″ x 8″ x 12″ Grinding Wheel Capacity
Manual Tailstock
Attached Electrical

 

Landis 1R 6″ x 18″ Plain OD Grinder

  |   By  |  0 Comments

R Plain

Landis 1R 6×18 Plain Cylindrical Grinder
Serial Number: 875-38

Specifications:
6″ Swing
18″ Center Distance
16″ x 1″ x 5″ Grinding Wheel Size
Hydraulic Table Traverse Speeds: 2″ – 200″ IMP
Tarry Left & Right
Pick Feed Left – Right – Left & Right
Spark out Timer
Auto Plunge Cycle w/ Comp
Dead Center Headstock
Manual Tailstock
Behind Wheel Guard Dresser w/ Comp
Bijur One Shot Lube
Attached Electrical 460/3/60

Norton 10″ x 48″ CTU Plain OD Grinder

  |   By  |  0 Comments

IMG  e

(1) USED 10” X 48” NORTON MODEL CTU PLAIN CYLINDRICAL GRINDERSPECIFICATIONS:

Nominal swing: 10”
Nominal length: 48”
Grinding wheel size: 30” x 5” x 12” bore
Table speeds: 2 – 240 IPM
Headstock speeds: 50 – 80 – 125 – 200 RPM
Headstock center taper: No 14 Jarno
Tailstock center taper: No 14 Jarno

EQUIPPED WITH:
Table travel
Pick feed
Plunge cycle
Tarry timers, left & right
Oscillating lever on grinding wheel spindle
Tail stock

Norton CTU Plain OD Cylindrical Grinder

  |   By  |  0 Comments

(1) 20″ NORTON  CTU PLAIN OD GRINDER ( RE-CONDITIONED )
SPECIFICATIONS:
30″ x 12″ x 3″ WHEEL CAPACITY
20″ SWING OVER TABLE
36″ CENTERS
LIVE HEADSTOCK w/ NEW VARIABLE SPEED DRIVE & MOTOR
HAND OPERATED TAILSTOCK W/ LIVE CENTER CAPABILITY
AUTO PLUNGE CYCLE ….. ( RAPID INFEED TO POSITIVE STOP )
HYDRAULIC TABLE TRAVEL
Chuck & Adaptor Plate Installed
SCOPE OF WORK TO RECONDITION NORTON GRINDER
1) SEMINOLE MACHINERY  to disassemble grinder, clean and check base for excessive wear and stress fractures.
2) Clean and inspect component parts, replace any components parts that are  worn or broken with remanufactured parts.
3) Grind, Scrape and Flake traverse table ways to original tolerance.
4) Grind, Scrape and Flake cross slide ways to original tolerance.
5) Re-build grinding wheel spindle as necessary.
6) Re-build hydraulic pump. Re-pair as necessary all hydraulic valves. NEW Filters & Hoses
7) Re-build lubrication system as necessary with New & Rebuilt PARTS
8) Re-build HEADSTOCK  as necessary, Install NEW Headstock Variable Speed Drive & Motor 
9) Re-build TAILSTOCK AS NECESSARY
10) Hand feed assembly to be completely disassembled, cleaned and inspected.
      INSTALL NEW BEARINGS  &  NEW COMPONENTS
11) Electrics:  New or rebuilt components as necessary
       ALL ELECTRIC MOTORS REBUILT WITH NEW BEARINGS
       All push bottoms to be repaired as necessary.
12) Coolant tank cleaned and checked.
      COOLANT PUMP REBUILT
13) MACHINE to be thoroughly cleaned and painted with industrial grade Dupont Dulex epoxy paint. Color of your choice.

18″ x 96″ Landis 4R Plain OD Cylindrical Grinder

  |   By  |  0 Comments

IMG

Landis. 18″ x 96″ Plain OD Grinder
Model 4R. Heavy Duty
New. 1990

GOVERNMENT SURPLUS. EXCELLENT
S/N. 867-90
18″ swing over table
96″ between centers
30″ x 12″ x 5″ wide wheel capacity
Self contained COOLANT pump & TANK
Hydraulic table travel
Plunge Feed
Table ways EXCELLENT

Landis 18″ x 72″ 4R Plain OD Grinder

  |   By  |  0 Comments

IMG

Landis 4R Plain OD Grinder
Serial Number: 819-13
Model 4R

SPECIFICATIONS:
18″ Swing
72″ Between Centers
30″ x 4″ x 12″ Diameter Grinding Wheel
Wheel Guard Can accommodate unto an 8″ Wheel Width
Jarno #14 Center Tapers
2-240 IMP Table Traverse Rate
15HP Spindle Drive Motor
Behind the Wheel Profile Dresser
Plunge Cycle
Tarry Timer Left & Right at Table Reversal
Variable Speed Headstock Drive
Dead Center Head Stock

Coolant Pump & Tank
Free Standing Electrical Panel – 3/60/480 Volt
Manuals & Prints

Cleaned, Painted & Cycled
Table Flaked

Approx Weight: 18,200lbs.
Machine Dimensions: 19′ 2″ L-R x 6′ F-B