| By admin | 0 Comments
Blanchard 18-36 Vertical Spindle Rotary Surface Grinder
SPECIFICATIONS:
18″ Segmented Grinding Wheel
36″ Diameter Magnetic Chuck
Incremental Feed
Rapid Up & Down Vertical Travel
Table Speeds 6, 9, 12, 18, 25, 33 RPM
Chuck Control
Dresser
Coolant Filtration System
| By admin | 0 Comments
Blanchard 18-36 Vertical Spindle Rotary Surface Grinder
SPECIFICATIONS:
36” Chuck – 1/4″ Chuck Life
18” Segmented Wheel
25 HP Spindle Drive Motor
Incremental Down Feed
Rapid Up & Down Vertical
Swing Arm Dresser
Table Speeds: 6, 9, 12, 18, 25, 33 RPM
Neutrol Chuck Control
Deep Bed Model DB55 Paper Filtration System w/ Exterior Coolant Tank & Pump
| By admin | 0 Comments
Blanchard 32-60 Vertical Spindle Rotary Surface Grinder
SPECIFICATIONS:
32″ Diameter Segment Grinding Wheel
60″ Magnetic Chuck – 3/4″ + Chuck Life
Grinding Wheel Spindle Motor: 75HP / 100HP
30″ Vertical Height Under Wheel
.001″ – .100″ IMP Course Feed Range
.0001″ – .010″ IMP Feed Range
Neutrolfier II Chuck Control
Trabon Lube Systems
Swing Arm Dresser
Re-Conditioned: 2022
Rebuilt Table / Gearing /Drive
Solid State Controls
New Table Rack
Table Slide Ground / Scrapped
Cleaned & Painted
New Chuck Life 3/4”+
Equipped With:
Polytech Coolant Dragout Unit with Coolant Tank & Pump
PlymoVent Mist Collector
480 Volt / Freestanding Panel
| By admin | 0 Comments
Heald 25A Horizontal Spindle Rotary Surface Grinder
SPECIFICATIONS:
Chuck Size: 24 7/8″
Chuck Speeds: 25,37,49,74 RPM
Swing Inside of Guard: 26 3/4″
Wheel Size: 14″ Min – 18″ Max x 2″ x 8″ Bore
Wheel Speed: 1285 RPM
Distance from Top of Chuck to Wheel Center: Max 13 1/4″ / Min 7″
Max Angle: Convex 15 deg / Concave 5 deg
Wheel Motor: 10 HP
Machine Dimensions: 84 1/2″ x 65″
Machine Weight: 8580 LBS.
| By Momentum | 0 Comments
Heald 261 Horizontal Spindle Rotary Surface Grinder
Serial Number: 47718
Specifications:
Table Magnetic Size: 17″
Swing Inside Pan: 18 1/2″
Wheel Size: 14″ x 1″ x 5″
Spindle Drive: 15 HP
Distance Top of Chuck To Center Of Grinding Wheel: 17 1/2″
Max & 4 1/2″ Min
Table Travel: 12″
Grinding Stroke: 8″
Max Angle Convex: 17 deg & Max Angle Concave: 10 deg
Chuck Speed: 50 to 225 RPM
Wheel Speed: 1680 RPM
Table Speed Grinding: 0 to 35 FPM
Table Speed Runout: 0 to 20 FPM
Power Feed Adjustment: .0001 to .0006 By .0001
Lubrication System
Coolant Tank & Pump w/ Paper Filtration
2 Axis DRO
460/60/3 Electrics
| By admin | 0 Comments
Blanchard 22D42 Vertical Spindle Rotary Surface Grinder
Serial Number: 13879
SPECIFICATIONS:
42″ Diameter Chuck
1/2″ Chuck Life
NEW 22″ Segmented Grinding Wheel Chuck
50HP Spindle Drive
(6) Table Speeds – 6, 9, 12, 18, 26 & 33 RPM
24″ Vertical Under Wheel
Swing Arm Dresser
Rapid Elevation
Incremental Down Feed
Neutrofier II Chuck Control with Variable Pull
Lube System
Dry Base Machine w/ External Coolant Pump & Tank
460V / 3 / 60 Electrics
* All New Guarding Fabricated
* Donaldson Torit Covered Mist / Dust Collector Enclosure, Removed but Available
| By admin | 0 Comments
Blanchard 20D36 Vertical Spindle Rotary Surface Grinder
SPECIFICATIONS:
20″ Segmented Grinding Wheel
36″ Diameter Chuck – Electromagnetic w/ Control
7/16″ Chuck Life
18″ Max Height Under Grinding Wheel
30 HP Spindle Drive
(6) Table Speeds 6, 9, 12 ,18, 25 & 33 RPM
Power Rapid Downed & Elevation
Incremental Downfeed
Power Table In & Out
Neutrofier Chuck Control
Dry Base Machine w/ Coolant Pump & Tank with Magnetic Separator
| By admin | 0 Comments
Blanchard 20D36 Vertical Spindle Rotary Surface Grinder
SPECIFICATIONS:
20″ Segmented Grinding Wheel
36″ Diameter Chuck – Electromagnetic w/ Control
18″ Max Height Under Grinding Wheel
40 HP Spindle Drive
(6) Table Speeds 6, 9, 12 ,18, 25 & 33 RPM
Power Rapid Downed & Elevation
Incremental Downfeed
Power Table In & Out
Neutrofier Chuck Control
Dry Base Machine w/ Coolant Pump & Tank
| By admin | 0 Comments
Blanchard 22-42 Vertical Spindle Rotary Surface Grinder
22″ Segmented Wheel
42″ Chuck – 3/8″ + Chuck Life
50HP Spindle Drive
24″ Vertical Under Wheel
Swing Arm Dresser
Rapid Elevation
Incremental Down Feed
Neutrofier Chuck Control with Variable Pull
Trabon Lube System
Wet Base Coolant with Pump
| By admin | 0 Comments
Blanchard Mdl 11-16 Vertical Spindle Rotary Surface Grinder
Serial Number: 10000
16″ Chuck Diameter
20″ Swing Inside Guard
7″ Height Under Wheel
11″ Wheel Diameter – Solid Ring Wheel
Chuck Speeds: 15, 24, 41 & 64 RPM
Neutrol II Chuck Control
220 V / 3 / 60
Wheel Dresser
Coolant in the Base
