Norton CTU Plain OD Cylindrical Grinder

Stock Number #2169

  • BrandNorton
  • Model20" x 36" CTU
  • YearReconditioned 2020
  • ConditionReconditioned 2020
  • Equipment TypePlain OD Grinder

Overview


(1) 20″ NORTON  CTU PLAIN OD GRINDER ( RE-CONDITIONED )
SPECIFICATIONS:
30″ x 12″ x 3″ WHEEL CAPACITY
20″ SWING OVER TABLE
36″ CENTERS
LIVE HEADSTOCK w/ NEW VARIABLE SPEED DRIVE & MOTOR
HAND OPERATED TAILSTOCK W/ LIVE CENTER CAPABILITY
AUTO PLUNGE CYCLE ….. ( RAPID INFEED TO POSITIVE STOP )
HYDRAULIC TABLE TRAVEL
Chuck & Adaptor Plate Installed
SCOPE OF WORK TO RECONDITION NORTON GRINDER
1) SEMINOLE MACHINERY  to disassemble grinder, clean and check base for excessive wear and stress fractures.
2) Clean and inspect component parts, replace any components parts that are  worn or broken with remanufactured parts.
3) Grind, Scrape and Flake traverse table ways to original tolerance.
4) Grind, Scrape and Flake cross slide ways to original tolerance.
5) Re-build grinding wheel spindle as necessary.
6) Re-build hydraulic pump. Re-pair as necessary all hydraulic valves. NEW Filters & Hoses
7) Re-build lubrication system as necessary with New & Rebuilt PARTS
8) Re-build HEADSTOCK  as necessary, Install NEW Headstock Variable Speed Drive & Motor 
9) Re-build TAILSTOCK AS NECESSARY
10) Hand feed assembly to be completely disassembled, cleaned and inspected.
      INSTALL NEW BEARINGS  &  NEW COMPONENTS
11) Electrics:  New or rebuilt components as necessary
       ALL ELECTRIC MOTORS REBUILT WITH NEW BEARINGS
       All push bottoms to be repaired as necessary.
12) Coolant tank cleaned and checked.
      COOLANT PUMP REBUILT
13) MACHINE to be thoroughly cleaned and painted with industrial grade Dupont Dulex epoxy paint. Color of your choice.

Interested in this machine?

OR

Call for more information 586-465-9700

Financing is available upon request.

Our Rebuild Process

Detailed and comprehensive from start to finish.

Learn More

Similar Models


Landis 24 x 120 LCHH

Plain OD Grinder