(1) Parker Majestic 2U Combination ID/OD Grinder – Remanufactured 2026
New: Remanufactured 2026
Specifications:
Swing: 12″
Center Distance: 28″
Table Speeds: 3-30″ IPM
Headstock Swivel: 90˙
Headstock Speeds: ( Variable ) 50-450 RPM
Crossfeed Graduated: 0.50″
Precision Dial: 0.000050″
Coolant System
Approx Floor Space: 41″ x 124″
Approx Weight: 3,800 lbs.
Equipped With:
Swing Around ID / OD Spindles
5″ Sine Bar on Headstock
Compound Universal Swivel Slides Under Grinding Spindle Assemblies
P & G One Shot Lubrication System
Scope of Remanufacturing – 2026
New D.C motor drive VARI-Speed on headstock
New D.C motor drive VARI-Speed on table drive
New lead screw in cross slide
Compound universal (2) swiveling slides under Grinding wheel
New P & G One Shot Lube System
ALL NEW ELECTRICS IN PANEL, PUSH BUTTONS, AND MOTORS
COMPLETELY FLAKED & SCRAPPED TO NEW TOLERANCE
SPINDLES COMPLETE REBUILD WITH NEW BEARINGS
SCOPE of Re-Conditioning
• Rebuild Headstock – New Bearings & Rebuild Drive Motor
• ID Spindle Rebuilt
• OD Spindle Checked & Tested for Run Out ( Excellent Condition )
• Rebuild Table Drive Motor
• Install New Cross Feed Screw & Nut
• Install New Meters & One Shot Lubrication Pump
• Ground, Scraped & Flaked Table Ways / Bed Ways & Cross Slide
• New Rulon Installed
• Tailstock Rebuilt
• New Variable Speed Drive & Motor on Headstock
• All NEW Electrical Components, Wiring & Push Buttons
• Test & Flush Coolant System
• Machine Completely Disassembled, Stripped & Painted to Customers Color Choice
(1) Used Parker Majestic Universal ID / OD Grinder – Re-Conditioned
Model: 1C Year: Re-Conditioned
Serial Number 1C-2026
Specifications:
12” x 24” Capacity
Vari Speed Headstock
Power Table Table Travel ( Variable Speed )
Swing Around ID Spindle
1.5 HP Spindle Motor
5″ Sine Bar on Headstock
Coolant Pump & Wet Base
Heald 274 Universal Internal Grinder
CATALOG SPECIFICATIONS
Swing over table……………………………. 30 dia.
Work head parallel to table on center
Swing over work head slide-head at 90 degrees ….. 20 dia.
Swing inside of standard chuck guard…………… 18 dia.
Angular adjustment of work head(max.)…………. 90 degrees
Travel work head cross slide…………………. front 6 max.
…………………..rear 15max.
Maximum length of hole that can be ground………. 14
Maximum diameter hole that can be ground……….. 21 3/4
Total table travel…………………………… 30 1/4
Maximum thickness of work and fixture with work head swiveled
using 3 grinding wheel………………………. 15
Center of chuck spindle from floor…………….. 48
Diameter of work head spindle flange…………… 9 5/8
Distance from face of spindle flange to swivel point
under work head…………………………….. 4 1/8
SPEEDS FEEDS
Work head speeds unlimited between……………..40-350 RPM
Table speeds for grinding unlimited between…….. 0-15 FPM
Rapid traverse of table………………………35 FPM
One turn of cross feed hand wheel……………… .050 dia.
Roughing cross feed-adjustable………………….0001 dia.
………………….0006 dia.
Finishing cross feed -non-adjustable…………. .0001 dia.
One turn of work slide hand wheel……………… .0100
DRIVE
Pump motor, 60 cyclea-c………………….2 H.P. 1800 RPM
Work head motor,d-c……………………. 3/4 H.P. 1750 RPM
Wheel head motor, 60 cyclea-c…………… 5 H.P. 3600 RPM
Coolant pump motor, 60 cyclesa-c………… 1/2 H.P. 1800 RPM
GENERALDATA
Capacity of oil tank…………………….. 15 gal
Capacity of coolant tank…………………. 55 gal
Length and width of base on floor…………. 78 1/4 x 28 1/8
Floor space(total)……………………… 123 x 101
Weight of machine(approx.)………………. 8850 lbs.
EQUIPMENT FEATURES
12″ Magnetic Chuck
Red Head Spindle
Cross sliding work head.
Swivel on work head.
All electrics controls.
Plain feed box.
Hand or hydraulic table traversing.
Face stop.
Single point dresser.
Attached electrical.
Variable speed work head.
Springfield 36E Crown Vertical Universal Grinder
SPECIFICATIONS:
Maximum Swing Inside Chuck Guards ………………… 44″
Work Table Diameter……………………………… 36″
Nominal Hole Depth that can be Ground……………… 18″
Stroke of Grinding Head, Maximum …………………. 21″
Distance under the Rail………………………….. 22″
Angle Setting of Head……………………………. + /- 45 Degrees
Chuck Speed Range (Infinitely Variable) …………… 6 to 120 RPM
Grinding Head Stroke, Feed ………………………. 0-80 IPM
Cross Feed, Range (IPD) …………………………. .0002 to .003
Tarry Period (Seconds) ………………………….. 0 to 14
Grinding Wheel Spindle Motor …………………….. 10 HP
Spindle Speed ………………………………….. 8000 RPM
Approximate Machine Dimensions……………………. 89″ x 99″
Approximate Machine Height……………………….. 130″
Approximate Machine Weight……………………….. 16,500 LBS
440/3/60
Digital Read Out
Coolant System
DESCRIPTION:
(1) Used Studer 110, 285mm x 1150mm CNC Universal OD/ID Grinder
New: 2017
Serial Number: 1042-0470
Hours: Approx: 1110
SPECIFICATIONS:
Linear Axes
Max Travel X: 285mm
Max Travel Speed X: 10,000 mm/min
Max Travel Z: 1,150 mm
Max Travel Speed Z: 20,000 mm/min
Swivel Axes
Swiveling Range B: 210º
Swivewing Range C: Infinite
Spindle Drive:
Max Spindle Power: 9 kW
Max Number of Revolutions: 2,810 rpm
Max Grinding Wheel Diameter: 508 mm
Max Grinding Wheel Width: 80 mm
Workpiece Date
Workpiece Length: 1,030 mm
Workpiece Diameter: 349 mm
Max Workpiece Weight: 120 KG
Distance Between Centers: 1,000 mm
Center Height: 175 mm
Equipped With:
Swing Around OD / ID Head
Tail Stock
Mist Buster
Coolant
Kellenberger Kel-Viva UR 175-1000 CNC OD / ID Grinder
Serial Number: 686049
New: 2009
Model: UR 175-1000
Heidenhain GrindplusIT CNC Control
SPECIFICATIONS:
Wheelhead
Left-Side Grinding Wheel Dia x Width – 20″ x 4″
Right-Side Grinding Wheel Dia x Width – 20″ x 4″
Internal Grinding Spindle Bore/Dia – 5″
OD Motor Output – 12.3 HP
Distance Between Centers – 40″
Z Axis Traverse Rate – 590 IMP
X Axis Max Travel – 12.6″
X Axis Rapid Traverse Rate – 300 IMP
Workhead Spindle Speed – 8 – 800 RPM
Workhead Internal Taper – Morse No. 5
Workhead Motor Output – 5.4 HP
Tailstock Sleeve Retraction – 2″
Hydrostatic Ways
Resolution Z & X ( Glass Linear Encoders ) – 0.1 micron
EQUIPPED WITH:
Diamond Dresser
Probing System
Ebbco PMF – 40000 – EC Chiller
Coolant
Misc New Parts / Tooling
NEW Software Package – KB0162518 UEModule Heidenhain UE212D
NEW KB 0162519 HEIDENHAIN PC UNIT
NEW KB 0154695 HARDDISK
Heald 273A Universal Internal Grinder
12″ Extended Base
SPECIFICATIONS:
Swing over Table: 24.5″ *
Angular adjustment of Workhead: 90 Degrees
Workhead Cross Slide Travel: 11 1/2″
Table Travel: 20″ Max.
Wheelhead Cross Slide Travel: 1 1/2″
Table Speed Range: 0 to 18 FPM
Rapid Traverse of Table: 18 FPM
Workhead Speeds from 0 to 500 RPM, Variable
EQUIPPED WITH:
Red Head Spindle – TBD ( Spindle Pictured DOES NOT go with machine )
Table mounted dresser
12″ Extended base
Workhead Sine bar
4 Barrel Stop / Facing Attachment
Hydrostatic Ways
Forward & Reversing Switch for Workhead
Electrical Motors & Controls 440/3/60
Dimensions: FB X RL – 62″ X 92″
Height: 77″
Est. Weight: 7,000 lbs
Coolant Tank & Pump
Heald 273A Universal Internal Grinder
12″ Extended Base
2″ Factory Riser
SPECIFICATIONS:
Swing over Table: 28.5″ *
Angular adjustment of Workhead: 90 Degrees
Workhead Cross Slide Travel: 11 1/2″
Table Travel: 20″ Max.
Wheelhead Cross Slide Travel: 1 1/2″
Table Speed Range: 0 to 18 FPM
Rapid Traverse of Table: 18 FPM
Workhead Speeds from 0 to 500 RPM, Variable
(* 28.5″ Swing w/ Riser Blocks )
EQUIPPED WITH:
Red Head Spindle 14000 RPM
Table mounted dresser
4” Factory Risers
12″ Extended base
Workhead Sine bar
4 Barrel Stop / Facing Attachment
Hydrostatic Ways
Forward & Reversing Switch for Workhead
Electrical Motors & Controls 460/3/60
Dimensions: FB X RL – 62″ X 92″
Height: 77″
Est. Weight: 7,000 lbs
Landis 36″ x 48″ Universal Cylindrical Grinder w/ ID Attachment
SPECIFICATIONS:
Swing: 36″
Distance Between Centers: 48″
Hydraulic Table Travel
Manual Tailstock
Internal Grinding Attachment
Table Mounted Dresser
Coolant System
Heald Cincinnati Milacron 174 Internal Grinder
Serial Number: 3125A2175-0082
New: 1982
SPECIFICATIONS:
32″ Swing over Table
54″ Swing in the Gap
23″ Table Stroke Length
29″ Face Plate to Spindle Nose
Power Cross Slide on Workhead
One Shot Lubrication Worked Slide
* 40″ (4) Jaw Chuck – Available at Additional Cost ( New was $18,000.00 )
