Stock Number: 5301
(1) USED LANDIS 10” X 20” 1R UNIVERSAL CYLINDRICAL GRINDER
Serial Number: 836-13
SPECIFICATIONS:
Nominal work swing: 10”
Nominal distance between centers: 20”
Table traverse speed: 2 to 240 IPM
Grinding wheel size: 12” diameter x 1” wide x 5” hole
Grinding wheel max width: 1.5”
Grinding wheel spindle motor: 5 HP
Workhead speeds: 30 to 150 RPM
Grinding wheelhead swivel: upper & lower : 90 Degrees each way
Headstock center: #10 Jarno
Footstock center: #6 Jarno
Footstock center movement: lever operated
Diameter of hole in spindle: 1”
Headstock swivel: 120 Degrees
Headstock spindle nose: 5A-2
EQUIPPED WITH:
Plunge cycle
Table Traverse
Tarry timers left and right reversal
Manual tailstock
Attached electrical panel
Stock# 5264
(1) USED LANDIS 10” X 20” 1R UNIVERSAL CYLINDRICAL GRINDER
Serial Number: 836-7
SPECIFICATIONS:
Nominal work swing: 10”
Nominal distance between centers: 20”
Table traverse speed: 2 to 240 IPM
Grinding wheel size: 12” diameter x 1” wide x 5” hole
Grinding wheel max width: 1.5”
Grinding wheel spindle motor: 5 HP
Workhead speeds: 30 to 150 RPM
Grinding wheelhead swivel: upper & lower : 90 Degrees each way
Headstock center: #10 Jarno
Footstock center: #6 Jarno
Footstock center movement: lever operated
Diameter of hole in spindle: 1”
Headstock swivel: 120 Degrees
Headstock spindle nose: 5A-2
EQUIPPED WITH:
Plunge cycle
Table Traverse
Tarry timers left and right reversal
Manual tailstock
Attached electrical panel
Cincinnati 26″ x 72″ Universal Cylindrical Grinder
SPECIFICATIONS:
Power Requirements: 220/3/60
26″ Swing
72′” Center Distance
Manual Tailstock
Coolant in Base
Attached Electrical
Tarry Left & Right
Pick Feed at Table Reversal
Reliance Variable Speed Headstock
W/ Jog Switch
Machine has excellent table ways w/ good flaking
Machine was Rebuilt in 1998
Machine Dimensions:
72.75″ Front – Back x 273.75″ Left – Right
11,600 LBS
18″x72″ Landis 3R Universal Cylindrical Grinder
Serial Number: 796-35
SPECIFICATIONS:
18″ Swing Over Table
72″ Distance Between Centers
Grinding Wheel Size: 14″ x 1 1/2″ x 5″
Tarry Timer L-R-LR
Incremental Feed at Table Reversal
Plunge Cycle
Manual Tailstock
Coolant in the Base w/ Pump
Attached Electrical Panel
Cleaned, Painted & Cycled
Bed Ways Flakes
