Cincinnati Hydraulic Universal Cylindrical Grinder – Reconditioned
I.D. Attachment Available Upon Request
Serial # 2U3U5K-1
Wheelhead swivel left / right center: 90 degrees
Maximum distance between centers: 72″
Maximum swing over table: 14 15/16″
Grinding Wheel diameter: 18″, 5 HP motor
Table traverse infin variable, speeds: 3 – 220 IPM
Hand table traverse per Rev / Handwheel: Rapid 15/16″ Slow 0.2″
Cross feed auto infeed / table revers: 0.0002″ – .0005 low : .005″ – .0125″ high
Cross feed wheelhead / per handwheel: 0.50″ low / .250″ high
Minimun infeed on diameter: 0.00005″
Headstock motor: 1 HP
Taper hold in spindle: # 9 B & S
Work head speeds: 50 – 500 RPM
Spindle nose: # 5 Amer stand
Headstock swivel toward / away: 90 degrees / 30 degrees
Dimensions: 20’L x 6″W
Weight: 15,000 LBS
Equipped with:
Full Hydraulic operation, hydraulic table reverse
“Acrafeed” dual rate (coarse & fine feeds) plunge infeed system
Pick feed (auto infeed), rapid wheel head advance & retraction
Right / Left table tarry
Work Light
Coolant System
Re-Alignment- Table and subtable reground, rescraped to bed ways.
Re-Aligned headstock and tailstock to proper center heights.
Rebuilt Hydraulic pump, cleaned and flushed lubrication system to ways.
New Headstock Drive Motor
Ready for Immediate Delivery
Parker Majestic 1C CNC Universal OD Grinder
Allen Bradley 9/Series Control
12″ Swing
Siemens Servo Drives
2HP Spindle Drive
Sine Bar on Headstock
Work done 1997
Euchner & Heidenham Scales
Manuals
Okuma Universal Cylindrical Grinder w/ ID Attachment
Type GCU
SN: 4406-0730
Swing: 19″
Distance Between Centers: 47″
Tarry Left & Right at Table Reversal
Auto & Hand Infeed on Grinding Wheel Head
Vary Speed Head Stock: 14-200 RPM
Manual Tail Stock
Swing Down ID Spindle
16″ Grinding Wheel Diameter
Attached Electrics
Self Contained Coolant
(1) USED LANDIS 10” X 20” 1R UNIVERSAL CYLINDRICAL GRINDER W/ ID ATTACHMENT
Serial Number: 879 – 25
SPECIFICATIONS:
Nominal work swing: 10”
Nominal distance between centers: 20”
Table traverse speed: 2 to 240 IPM
Grinding wheel size: 12” diameter x 1” wide x 5” hole
Grinding wheel max width: 1.5”
Grinding wheel spindle motor: 5 HP
Workhead speeds: 30 to 150 RPM
Grinding wheelhead swivel: upper & lower : 90 Degrees each way
Headstock center: #10 Jarno
Footstock center: #6 Jarno
Footstock center movement: lever operated
Diameter of hole in spindle: 1”
Headstock swivel: 120 Degrees
Headstock spindle nose: 5A-2
EQUIPPED WITH:
Swing Down ID Spindle
Plunge Feed
Table Traverse
Tarry timers left and right reversal
Attached electrical panel – 220 Volt
Coolant Tank & Pump
Cincinnati 12″ x 48″ Universal Cylindrical Grinder
Serial Number: 3532E5V-001
Specifications:
12″ Swing
48″ Distance Between Centers
Variable Speed Workhead
Tarry L & R
Pick Feed
Attached Electrical – 460 Volt
Coolant in the Base w/ Pump
Cincinnati 12″ x 48″ Universal Cylindrical Grinder
Model: 12″ x 48″
Specifications:
12″ Swing
48″ Distance Between Centers
Variable Speed Workhead
Tarry L & R
Pick Feed
Free Standing Electrical – 440 Volt
Coolant in the Base w/ Pump
Internal Grinding Spindle
12″x72″ Cincinnati Universal OD Grinder
New: 1978
Model: DE
SPECIFICATIONS:
12″. Swing over table
72″. Between centers
Headstock. ( Live. &. Dead. Centers )
Tailstock. ( hand operated )
20″x5″ x 2″ wide. Grinding wheel capacity
Automatic Plunge Cycle
Pick Feed
Tarry Timer
Hydraulic table travel
Dresser
Brown & Sharpe #1 Universal Cylindrical Grinder
Serial Number: 521-1-71
Stock No: 5303
Specifications:
10″ Swing
20″ Distance Between Centers
Internal Grinding Attachment
Right & Left Grinding Wheels
Variable Speed Headstock – 60 – 600 RPM
Hydraulic Table Traverse – 3 – 150 IPM
Automatic Feed on Grinding Wheel Head .0001″ – .003″
Backing Plate w/ 6″ Magnetic Chuck
Attached Electrical Panel
220/3/60
Cincinnati 14″ x 36″ Universal Cylindrical Grinder
Serial Number: 35324D5U-0001
Stock Number: 2134
Model: 14H
Specifications:
14″ Swing
36″ Distance Between Centers
Tarry L & R
Pick Feed
Attached Electrical
Coolant in the Base w/ Pump
Variable Speed Workhead
Equipped With:
Heavy Duty Variable Speed Headstock
Internal Grinding Spindle Attachment
Center Rest
240/3/60
Prints & Manuals
Bed Ways Scraped
Summit Universal Cylindrical Grinder w/ Internal Attachment
Mdl RT-Super 12x60R
Serial Number: 1310
SPECIFICATIONS:
12″ Swing
60″ Between Centers
14″ DIA GW
1 steady Rest
1 Center Rest
Hydraulic Table Traverse
Pick feed Left & Right
Swingdown ID Attachment
Manual Tailstock
220/3/60
